HP ProLiant DL380 User Manual

Regulatory Compliance Notices 149
Laser Safety Warnings
WARNING: To reduce the risk of exposure to hazardous
radiation:
Do not try to open the laser device enclosure. There are no
user-serviceable components inside.
•
•
•
Do not operate controls, make adjustments, or perform
procedures to the laser device other than those specified
herein.
Allow only authorized service technicians to repair the laser
device.
Compliance with CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and
Drug Administration implemented regulations for laser products on August 2,
1976. These regulations apply to laser products manufactured from August 1,
1976. Compliance is mandatory for products marketed in the United States.
Compliance with International Regulations
All HP systems equipped with laser devices comply with appropriate safety
standards including IEC 825.
Laser Product Label
The following label or equivalent is located on the surface of the laser product.
This label indicates that the product is
classified as a Class 1 laser product.
HP CONFIDENTIAL
File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM

HP ProLiant DL380 Specifications

General

Product Line	ProLiant
Server Type	Rack Server
Rack Height	2U
Processor Type	Intel Xeon Scalable
Memory Type	DDR4
Storage Options	SAS, SATA, SSD
Storage Controller Type	HPE Smart Array controllers
RAID Options	RAID 0, 1, 5, 6, 10, 50, 60
Network Options	Embedded 1GbE or 10GbE
Power Supply Options	Redundant power supplies available, various wattage options
Management	iLO (Integrated Lights-Out)
Expansion Slots	PCIe 3.0
Operating System Support	Windows Server, Linux, VMware
Processor Cores	Up to 28 cores per processor