HP ProLiant ML110 User Manual

1
System Features
Features Summary
Hardware
•
•
•
•
•
•
•
•
•
Single CPU socket that supports 478-pin Intel
®
processors
Intel 879P core logic chipset consisting of:
— 82879P – north bridge
— ICH-S – south bridge
Phoenix
®
BIOS v4.06 chipset
SMSC
®
LPC47M192 Super I/O chipset
Onboard Broadcom
®
5705 10/100/1000 Mbps Gigabit Ethernet controller
ATI
®
Rage
™
XL chipset with 8 MB SDRAM of video memory
Four DIMM slots with support for:
— DDR 400 unbuffered ECC DIMMs in 256 MB, 512 MB, or 1 GB configuration
— Up to 2 DIMMs per-channel, single-sided and/or double-sided
— Byte masking on writes through data masking
— Single-bit Error Correcting Code (or Error Checking and Correcting) on the system
memory interface
Five PCI bus slots with two separate bus channels
— Two 32-bit/33 MHz 5V PCI bus slots
— Three 64-bit/66 MHz 3.3V PCI-X bus slots
Media storage
— 3.5-inch, 1.44 MB floppy disk drive
— IDE CD-ROM drive
HP ProLiant ML110 Server Operations and Maintenance Guide 1-1

HP ProLiant ML110 Specifications

General

Product Line	ProLiant
Server Type	Tower
Processor	Intel Xeon E3-1200 series
Chipset	Intel C202
Memory Slots	4
Storage	SATA Hard Drives (HDDs) or Solid State Drives (SSDs)
Drive Bays	4 LFF or 8 SFF
RAID Support	RAID 0, 1, 10
Form Factor	Tower
Management	HP iLO
Operating System Support	Windows Server, Linux, VMware
Memory	DDR3 or DDR4 ECC Unbuffered DIMMs (UDIMMs) (depending on the specific generation)