Table 3-14 New Citrix ICA Connection Firewall Settings (continued)
Option Description
Username
Type the proxy user name for the account to use to connect to a remote
computer.
Password Type a password for the account to use to connect to a remote computer.
Use Alternate Address for Firewall
Connection
The Citrix ICA Client will request the alternate address defined for the server
when contacting servers inside the firewall. The alternate address must be
specified for each server in a server farm.
Click Next to continue.
7. Select the approriate values for the smart ping settings:
Table 3-15 New Citrix ICA Connection Smart Ping Settings
Option Description
Smart Ping
Allows you to enable HP ThinPro to ping the server before attempting a
connection. If the server name fails to resolve or the server fails to respond to
the ping, the thin client aborts the connection attempt. Valid options are: Don't
ping and Standard Echo. The next two options are disabled unless this
option is set to Standard Echo.
Smart Ping Port Allows you to specify a port for Smart Ping.
Smart Ping Timeout Allows you to specify a time period for Smart Ping to keep pinging.
Click Next to continue.
8. Select the approriate values for the common settings (refer to
Table 3-9 New Connection
Advanced Settings on page 10).
9. Click Finish to save your settings and close the wizard.
NOTE: To enable Citrix ICA USB Redirection, use the USB Manager utility. See USB Manager
on page 38 for instructions.
RDP
Microsoft Remote Desktop Protocol (RDP) enables Windows-based applications to communicate
over network connections. It is installed on all versions of Windows later than Windows NT.
1. To add an RDP connection, click Connections > Add.
2. Select RDP. Set the appropriate network options:
Table 3-16 New RDP Connection Network Settings
Option Description
Name The Browse button allows you to browse for the remote system.
Address The IP address of the remote system.
Port The port to use for the remote connection.
ENWW
Connections
13