5. Type or select the Multicast Port (Altiris server port).
6. If Use Multicast is not selected, type the specific Altiris server address in the TCP Address
field.
7. Type or select the TCP Port (Altiris server port).
8. Click OK to save your changes and close the dialog box.
Easy Config
Easy Config is a tool in the Easy Tools Management suite. See HP Easy Tools Administrator’s
Guide at
http://www.hp.com/support for full details.
Easy Update
Easy Update is a tool in the Easy Tools Management suite. See HP Easy Tools Administrator’s
Guide at
http://www.hp.com/support for full details.
Factory Reset
In Factory Reset, you can
●
Save the current configuration
●
Restore the factory settings
●
Restore the factory image
To access these functions:
1. Double-click Factory Reset.
2. Click the button that will accomplish the task you desire.
HP Automatic Update
To configure HP Automatic Update:
1. Double click HP Automatic Update.
2. Click Enable HP Automatic Update on system startup if you wish to have this system
updated on restarts.
3. If the previous option is enabled, you can click Use DHCP tag to detect HP Automatic Update
server if you wish to supply the server address via DHCP. If you wish to supply the Server,
Path, User name, and Password you may do this in the supplied fields.
HPDM Agent
Configure the HP Device Management Agent using this feature.
1. Double-click HPDM Agent to access this screen.
2. Use the General tab to set the following
●
Backup Gateway
●
Pull Interval
48 Chapter 3 Reference ENWW
To Next Page
Loading...
Need help?
General