Explanation
The S-VOLs are not ready for a backup.
Recommended action
Confirm the pair status using Storage Management Software. Wait until the status becomes PAIR
or PSUS and re-execute.
E2002041
Message
S-Vol cannot be created for this volume. P-Vol is associated with Snapshot-V-Vol.
Explanation
Creation of an S-VOL failed. The P-VOL is associated with a V-VOL.
Recommended action
After deleting the V-VOL associated with the specified P-VOL, create an S-VOL.
E2002042
Message
Business Copy cannot be created for this volume.
Explanation
The specified P-VOL cannot be used for Business Copy.
Recommended action
• (1) The specified P-VOL may not be targeted for a backup. Specify the correct P-VOL.
• (2) The specified P-VOL may not be mapped to the VSS installation server (application
server). Map it using Storage Management Software.
• (3) Confirm the valid/invalid setting of the Business Copy function using Storage Management
Software. If it is invalid, change it to valid.
E2002043
Message
S-Vol cannot be created for this volume. P-Vol is being formatted.
Explanation
Creation of S-VOL failed. P-VOL is being formatted.
Recommended action
Create the S-VOL after the P-VOL is formatted.
E2002044
Message
Business Copy cannot be created at this time. Please verify the pair status using /querysvol
command.
Explanation
Because the pair status is not PSUS, the S-VOL cannot be created.
Error messages 115
To Next Page
Loading...
Need help?
General
