EasyManuals Logo

Huawei B2368 User Manual

Huawei B2368
191 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #137 background imageLoading...
Page #137 background image
Figure 15-10 SIP Call Progression
Step 1 A sends a SIP INVITE request to B. This message is an invitation for B to participate in a SIP
telephone call.
Step 2 B sends a response indicating that the telephone is ringing.
Step 3 B sends an OK response after the call is answered.
Step 4 A then sends an ACK message to acknowledge that B has answered the call.
Step 5 Now A and B exchange voice media (talk).
Step 6 After talking, A hangs up and sends a BYE request.
Step 7 B replies with an OK response confirming receipt of the BYE request and the call is
terminated.
----End
Voice Coding
A codec (coder/decoder) codes analog voice signals into digital signals and decodes the
digital signals back into analog voice signals. The L
TE Device supports the following codecs.
l G.71
1 is a Pulse Code Modulation (PCM) waveform codec. PCM measures analog
signal amplitudes at regular time intervals and converts them into digital samples. G.711
provides very good sound quality but requires 64 kbps of bandwidth.
l G.726 is an Adaptive Differential PCM (ADPCM) waveform codec that uses a lower
bitrate than standard PCM conversion. ADPCM converts analog audio into digital
signals based on the difference between each audio sample and a prediction based on
previous samples. The more similar the audio sample is to the prediction, the less space
needed to describe it. G.726 operates at 16, 24, 32 or 40 kbps.
l G.729 is an Analysis-by-Synthesis (AbS) hybrid waveform codec that uses a filter based
on information about how the human vocal tract produces sounds. G.729 provides good
sound quality and reduces the required bandwidth to 8 kbps.
MWI (Message Waiting Indication)
Enable Message Waiting Indication (MWI) enables your phone to give you a message-waiting
(beeping) dial tone when you have a voice message(s). Your VoIP service provider must have
a messaging system that sends message waiting status SIP packets as defined in RFC 3842.
LTE CPE B2368
User Guide
15 VoIP
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 129

Table of Contents

Other manuals for Huawei B2368

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei B2368 and is the answer not in the manual?

Huawei B2368 Specifications

General IconGeneral
CategoryNetwork Router
Maximum Download Speed600 Mbps
Maximum Upload Speed100 Mbps
Wi-Fi Standard802.11a/b/g/n/ac
Antenna TypeExternal
Operating Temperature-40°C to +55°C
3G UMTS Frequency BandsB1/B8
MIMO4x4 MIMO
Wi-Fi Frequency2.4 GHz
4G LTE Frequency BandsB1/B3/B7/B8/B20/B38
Wi-Fi Speed300 Mbps
InterfacesRJ45

Related product manuals