Figure 10-8 Security > Firewall > DoS
Each field is described in the following table.
Table 10-6
Security > Firewall > DoS
Label Description
DoS Protection
Blocking
DoS (Denial of Service) attacks can flood your Internet connection
with invalid packets and connection requests, using so much
bandwidth and so many resources that Internet access becomes
unavailable.
Select Enable to enable protection against DoS attacks or Disable to
disable it.
Apply Click Apply to save the DoS Protection settings.
Cancel Click Cancel to restore your previously saved settings.
10.6 Firewall Technical Reference
This section provides some technical background information about the topics covered in this
chapter.
10.6.1 Guidelines For Enhancing Security With Your Firewall
Step 1 Change the default password via web configurator
.
Step 2 Think about access control before you connect to the network in any way.
Step 3 Limit who can access your LTE Device.
Step 4 Don't enable any local service (such as Telnet or FTP) that you don't use. Any enabled service
could present a potential security risk. A determined hacker might be able to find creative
ways to misuse the enabled services to access the firewall or the network.
Step 5 For local services that are enabled, protect against misuse. Protect by configuring the services
to communicate only with specific peers, and protect by configuring rules to block packets for
the services at specific interfaces.
Step 6 Keep the firewall in a secured (locked) room.
----End
LTE CPE B2368
User Guide
10 Firewall
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 86
To Next Page
Loading...
Need help?
General
