Table 4-1 Network Setting > Broadband > Broadband
Label Description
Action Select Connect to have the L
TE Device use the L
TE connection.
Select Disconnect to have the LTE Device not use the LTE connection.
Apply Click this to save the change in this section.
Cancel Click this to restore your previously saved settings in this section.
Data Roaming Select Enable to allow the LTE Device to use other carriers' LTE
connections.
Select Disable to stop the LTE Device from using other carriers' LTE
connections.
Apply Click this to save the change in this section.
Cancel Click this to restore your previously saved settings in this section.
Internet Setup
# The index number of the broadband connection in the list.
Enabled This shows whether the broadband connection is turned on or off.
Name This shows the name of the broadband connection.
APN This is the name of the LTE network to which the broadband
connection connects.
NAT This shows whether NAT is activated or not for this connection.
Modify Click the Edit icon to configure the connection.
4.2.1 Edit Broadband Connection
Use this screen to configure a WAN connection.
Click an L
TE connection's Edit icon to display a screen like the one shown next.
LTE CPE B2368
User Guide
4 Broadband
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 29
To Next Page
Loading...
Need help?
General
