User
Name
User Description Default
Passwo
rd
User
Type
User
Status
Login
Method
– A user who logs in to the
BIOS Setup menu over a
serial port or KVM.
No user name is used. This
applies to all compute nodes.
Huawei
12#$
Administra
tor
Enabled Remote
or local
login
ftp An FTP user that transmits
files over FTP.
– System
account
Locked Login
prohibite
d
sshd A user of the SSHD.
The SSH protocol allows a
user to remotely log in to the
host execution program and
securely manage the host.
Huawei
12#$
Administra
tor
Enabled Remote
or local
login
nobody An anonymous user.
The nobody account requires
no special permissions to
allocate software processes.
– System
account
Locked Login
prohibite
d
telnetd A user of the Telnet service.
You must manually enable
this user.
– System
account
Locked Login
prohibite
d
5.3 Configuring Management Modules
After installing the MM910, configure it on a local PC to manage components in an E9000
chassis.
Configuration Process
Step 1 Log in to the MM910 WebUI.
Log in to the MM910 WebUI by using the Internet Explorer.
Step 2 Check the MM910.
l View the indicators on the panel and verify that the MM910 status is normal.
l Query the MM910 version and verify that the version is the required one.
Step 3 Change the initial password of the default user.
Change the initial password of the default user to strengthen system security.
Step 4 Configure basic data.
Configure the static IP address, time zone, NTP time synchronization, floating IP address,
default gateway, and SNMP trap reporting for the MM910.
E9000 Server
User Guide
5 Configuring the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 96
To Next Page
Loading...
Need help?
General