EasyManuals Logo

Huawei E9000 User Manual

Huawei E9000
189 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
Figure 6-33 Inserting an optical cable and optical module
4. Horizontally insert the optical module into the optical port until the optical module snaps
into place. See (2) in Figure 6-33.
----End
6.3.10 Verifying the Switch Module Configuration
This section applies only to the CX110, CX111, CX310, CX311, CX312, CX320, CX710,
CX910, CX911, CX912, CX913, CX915, CX916, CX916L and CX920.
NO TICE
If the original active switch module restarts due to a power failure after you install a spare
switch module, remove the spare switch module, wait until the original active switch module
is restarted, and reinstall the spare switch module.
Procedure
Step 1 Log in to the switch module CLI.
Step 2 Check whether the switch module configuration is restored successfully.
l For V5 switch module software, query the configuration that takes effect and the saved
configuration. If they are consistent, the configuration is restored successfully.
display current-configuration and display save-configuration
l For V8 switch module software, check the configuration restoration result.
display configuration recover-result
The following command output indicates that the configuration is restored
successfully:
<HUAWEI> display configuration recover-
result
Info: The current startup saved-configuration file is flash:/
vrpcfg.zip.
The number of failed commands is
0.
The following command output indicates that the configuration fails to be restored:
<HUAWEI> display configuration recover-result
Warning: Finish configuration recover from flash:/vrpcfg.zip, but some
configurations lost.
E9000 Server
User Guide
6 Parts Replacement
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 132

Table of Contents

Other manuals for Huawei E9000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei E9000 and is the answer not in the manual?

Huawei E9000 Specifications

General IconGeneral
Form Factor12U chassis
Blade Slots16 half-width slots or 8 full-width slots
Switch ModulesGE, 10GE, and IB switches
Management ModulesTwo hot-swappable management modules for redundancy
Power SupplySupports up to 6 hot-swappable power supply units (PSUs)
CoolingRedundant hot-swappable fan modules
Processor OptionsIntel Xeon E5-2600 v3/v4 series processors (depending on blade type)
Memory CapacityUp to 1.5 TB per blade
Storage OptionsSAS/SATA/SSD options in blades
Networking10GE/40GE networking options
ManagementHuawei iBMC (Intelligent Baseboard Management Controller)
Operating System SupportRed Hat Enterprise Linux, SUSE Linux Enterprise Server, Windows Server, VMware ESXi

Related product manuals