5 Parameter Settings
EchoLife HG612 FTTC VDSL NTE
User Guide
5-16
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-05-15)
Table 5-18
5.13 Configuring the UPnP
Function
The universal plug and play (UPnP) function supports plug-and-play and automatic
discovery for multiple types of network equipment. If the UPnP function is enabled, a
device that supports the UPnP function can access networks, obtain an IP address,
transmit performance data, detect other devices, and learn the performance data of the
other devices.
Path
Choose Advanced > UPnP.
Parameter Description
Table 5-18 describes UPnP parameters.
UPnP parameters
Parameter Description
UPnP
It specifies whether to enable the UPnP function on the
HG612.
5.14 Configuring the LED
Function
The HG612 can control whether to turn on the LEDs.
Path
Choose Advanced > LED.
Parameter Description
Table 5-19 describes LED parameters.
Table 5-19 LED parameters
Parameter Description
LED active It specifies whether to turn on the LEDs.
If the
LED active
is cleared, it indicates that the LEDs are
turned off.
To Next Page
Loading...
Need help?
General
