● Your band/watch will not vibrate to send you notications while Do Not Disturb is
enabled or you are asleep.
● Your band/watch will only send activity reminders between 8:00–12:00 and 14:00–22:00.
3.7 Measuring blood oxygen levels (SpO2)
1. Wear your watch correctly and keep your arm still.
2. From the home screen press the Up button, swipe until you
nd SpO
2
. Touch
SpO
2
. The watch will then measure your current heart rate.
If you are not wearing your watch, or wearing it incorrectly, an error message
will be displayed. Please read the onscreen instructions for how to wear it
correctly and touch Retry to restart the measurement.
Note:
– The measurement will be interrupted if you swipe right on the watch
screen, start a workout with the Huawei Health app, or receive a
notication for an incoming call or alarm.
– To ensure the accuracy of the heart rate measurement, wear the watch
correctly and ensure that the strap is fastened. Ensure that the band body
is in direct contact with your skin.
– Stay as still as possible during the measurement.
– Each measurement lasts for about 1 minute, and the displayed SpO
2
level
is updated every 3 seconds.
– During the measurement, the watch will also measure your heart rate.
● To measure your blood oxygen level while mountain climbing, swipe up or down on the
climbing screen, select SpO2 then touch Measure.
● To use this feature, update HUAWEI WATCH GT 2 and HONOR MagicWatch 2 to
1.0.6.32 or later, or HUAWEI WATCH GT 2e to 1.0.1.20 or later. Update the Huawei
Health app to 10.0.5.311 or later.
● This feature is not available for users in Japan, Korea, or Taiwan (China).
HONOR Watch GS Pro OnlineHelp（01,en） 3 Health management
Issue 01 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 24
To Next Page
Loading...
Need help?
General