9 Handling the Inverter
9.1 Removing a SUN2000
Procedure
Step 1 Power
o the SUN2000. For details, see 8.1 System Power-O.
Step 2 Disconnect all cables from the SUN2000, including signal cables, DC input power
cables, AC output power cables, and PE cables.
Step 3 (Optional) Remove the Smart Dongle from the SUN2000.
Step 4 Remove the SUN2000 from the mounting bracket.
Step 5 Remove the mounting bracket.
----End
9.2 Packing the SUN2000
● If the original packing materials are available, put the SUN2000 inside them
and then seal them by using adhesive tape.
● If the original packing materials are not available, put the SUN2000 inside a
suitable cardboard box and seal it properly.
9.3 Disposing of the SUN2000
If the SUN2000 service life expires, dispose of it according to the local disposal
rules for electrical equipment waste.
SUN2000-(8KTL-20KTL)-M2
User Manual 9 Handling the Inverter
Issue 11 (2023-02-07) Copyright © Huawei Technologies Co., Ltd. 106
To Next Page
Loading...
Need help?
General