Viewing the Zone Information
From the Zone Summary screen touch the zone you wish to view.
Zone Name
Press to Start or Stop To Manually Modify a Zone
Next Run Time and Length
Current measured for Zone (12 Zone Pro only)
Water Usage (if HC Flow meter is used)
Sensor State (if configured)
Type of Watering Schedule
Current Zone Number
The Zone Status screen allows you to view the following information –
Zone Name: This is the name of the Zone you’ve configured in the Hydrawise app
Sensor: The current sensor state if configured in the Hydrawise app.
Water Usage: Water usage for this zone run. This is only shown if you have a flow
meter installed and the zone is currently running.
Current: Indicates the current that all solenoids are using (including a master solenoid
if configured). Generally speaking, this value ranges from 200mA to 600mA depending
on the number of solenoids attached to a single zone output. The controller has a built
in fail-safe to automatically stop your zone if more than approximately 800mA is
To Next Page
Loading...
Need help?
General
