Looking for Wireless wireless networks.
Connecting to
Controller is currently trying to connect to your
wireless router.
Waiting for IP
Controller has connected to your wireless
router and is waiting for your wireless router to
give it an IP address. Your wireless router must
be configured as a DHCP server.
Connected
Controller has successfully connected to your
wireless router.
Local Connection Only Controller is acting as a local wireless router.
Troubleshooting Wireless Connection Issues
After entering your wireless settings, the controller will connect to your access point. The
connection process takes about 30 seconds.
Upon successful connection the wireless status will show Connected.
If your controller fails to connect to your wireless router check the following:
Your password is entered It is case sensitive and must be at least 8 characters long.
Check that the wireless security types match between the controller and your wireless
Hydrawise recommends use of WPA2 security between the controller and your
wireless router.
We have WiFi specifications here: WiFi Specs [8]
Manual Operation from the
Controller
You can run an irrigation zone on demand from the Hydrawise unit prior to having the
system connected to your home Wi-Fi network.
To Next Page
Loading...
Need help?
General
