Version Number: Home>Status>Controller Status
Zone Status: Home>Zones>Select Zone
Setting up a Controller in Offline
Mode
Offline programming will allow your controller to run without any internet access like a
traditional irrigation controller. You have two options to program your controller if you
currently do not have WiFi access.
1. Using the App to Program controller with no WiFi
2. Offline programming at the controller
Using App to Program controller with no Wifi (e.g; new construction)
In some cases, it may not be convenient to program the controller using the offline mode
feature (programming using controller screen). The following steps must be taken if
programming the controller through the app with a hotspot.
1. Create Hotspot with Smartphone: Depending on your smartphone, please use either
guide below:
Apple hotspot [4]
Android hotspot [5]
2. Once you activate your hotspot, connect the controller to verify the Wi-Fi on the
controller is working properly.
3. Disable WIFI completely. Settings > Offline Settings > Disable Wifi
4. Remove hotspot and programming will remain in the controller.
Programming at Controller
Hydrawise has two different modes that will run in offline mode at the controller.
To Next Page
Loading...
Need help?
General
