ENG
NODE COMPONENTS
This section provides a brief overview of some of the components
of the NODE. Each item will be discussed in further detail later.
However, this section can be helpful in getting acquainted with the
different options available.
8
9
10
11 12 14 1315
2
3 1
5
6
7
4
Control Buttons
1.
Button
– Increases the selected ashing display
2.
Button
– Decreases the selected ashing display
3.
Button
– Selects programming function
4.
Button
– Advances the selected ashing display back to the
next item
5.
Button
– Navigates the selected ashing display back to
the previous item
6.
Button
– Selects the program (A, B, or C)
LCD Display
1.
Main Display
– Indicates all program information
2.
Station Number
– Indicates the station number being programmed
3.
Start Time Number
– Indicates the start timer number being
programmed
4.
Program
– Indicates the program (A, B, or C)
5.
Current Time/Day
– Indicates when current day/time is
being set
6.
Start Times
– Indicates when start times are being set
7.
Run Times
– Indicates when Run Times are being set. Allows
user to set run times from 1 minute to 6 hours.
8.
Watering Days
– Allows the user to select individual days to
water or a selected number of days between watering (interval)
9.
%
Seasonal Adjustment
– Allows the seasonal adjustment to be
programmed form 10–150% (default value is 100%)
10.
System Off
– Indicates that watering is suspended
11.
Manual On/Off
– Indicates when manual watering is
programmed. Allows the user to activate the station manually.
12.
MV
– Indicates that station one is set to master valve operation
(only available on 2,4, or 6 station models)
13.
Battery Status
– Indicates remaining battery life
14.
Umbrella
– Indicates the rain sensor is suspending irrigation
15.
Crossed Umbrella
– Indicates the rain sensor has been
manually bypassed
3
To Next Page
Loading...
Need help?
General
