EasyManuals Logo

Husqvarna AUTOMOWER 435X AWD User Manual

Husqvarna AUTOMOWER 435X AWD
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
5. Remove the 3 screws. Use a manual
straight slot or cross-tip screwdriver.
6. Remove each blade and screw.
7. Fasten new blades and screws.
8. Check that the blades can pivot freely.
5.4 To replace the top covers
The top cover is an accessory available in
different colors. Speak to your local Husqvarna
representative for more information.
CAUTION:
Clean grass and dirt from
the product before you remove the
covers.
5.4.1 To remove the front top cover
1. Push the STOP button to stop the product.
2. Remove the front top cover from the snap-
on clips on the product.
3. Lift the front top cover.
5.4.2 To install the front top cover
1. Put the front top cover on the snap-on clips.
42
- Maintenance
1404 - 002 -

Table of Contents

Other manuals for Husqvarna AUTOMOWER 435X AWD

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna AUTOMOWER 435X AWD and is the answer not in the manual?

Husqvarna AUTOMOWER 435X AWD Specifications

General IconGeneral
Cutting Width22 cm
Cutting Height, Min-Max30-70 mm
Battery TypeLi-Ion
Typical Charging Time30 min
Typical Mow Time on One Charge100 min
Product Size, LxWxH93x55x29 cm
Maximum Slope Performance Inside Installation70%
Working Area Capacity3500 m²
Battery Voltage18 V
Battery Capacity5.0 Ah
Guide WireYes
GPS-assisted NavigationYes
Lift SensorYes
Tilt SensorYes
Ultrasonic SensorYes
ConnectivityBluetooth, Cellular
Weather ResistanceYes
Warranty2 years
Blade TypePivoting Razor Blades

Related product manuals