Husqvarna FE 450 User Manual

12 SERVICE WORK ON THE CHASSIS 52
12.15 Installing the front fender
F00283-10
Main work
–
Position the front fender. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the headlight mask with the headlight. ( p. 90)
– Check the headlight setting. ( p. 91)
12.16 Removing the shock absorber
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 45)
K00589-10
Main work
– Remove the cable ties.
–
Remove screws

.
–
Remove screws

with the washers.
– Remove the frame protectors on the left and right.
F00284-10
–
Remove screw

.
–
Remove fitting

.
Info
Raise the wheel slightly to be able to remove the screws more easily.
F00285-10
–
Press angle lever

toward the rear.
–
Press linkage lever

downward.

Husqvarna FE 450 Specifications

General

Brand	Husqvarna
Model	FE 450
Category	Motorcycle
Language	English