12 SERVICE WORK ON THE CHASSIS 53
F00458-10
–
Disconnect plug-in connector
.
F00459-10
–
Remove screws
.
– Pull off foot brake cylinder from the push rod.
F00294-01
– Remove the connecting link of the chain.
– Take off the chain.
F00460-10
–
Remove nut
and pull out the swingarm pivot.
– Push the swingarm back and secure it against falling over.
F00461-10
–
Hold the shock absorber and remove screw
.
– Remove the shock absorber carefully at the bottom.
12.17 Installing the shock absorber
F00462-10
Main work
– Carefully position the shock absorber into the vehicle from the bottom.
–
Mount and tighten screw
.
Guideline
Screw, top shock
absorber
M10 60 Nm
(44.3 lbf ft)
Loctite
®
2701™
To Next Page
Loading...
Need help?
General
