Husqvarna PW 350 Workshop Manual

12 – English
2.10 To disassemble/assemble the
hose reel, PW 350, PW 360
1. Remove 4 torx TX20 screws to remove the telescopic
handle.
2. Remove 2 torx TX20 screws from the rear side.
3. Remove the hose reel from the cabinet.
2.11 To disassemble/assemble the
high pressure hose, PW 350, PW 360
1. Remove the torx TX20 screw and the u-pin.
2. Remove the hose router.
Repair instructions

Husqvarna PW 350 Specifications

General

Brand	Husqvarna
Model	PW 350
Category	Pressure Washer
Language	English