14 – English
2.14 To disassemble/assemble the
easy start valve
1. Put the pump on a table.
2. Disassemble the easy start valve.
3. Assemble in the following order:
- 1. O-ring.
- 2. Easy start insert.
- 3. Spring.
- 4. Ball.
- 5. Ball guide.
- 6. Plug.
3
1 2 4
5
6
2.15 To disassemble/assemble the
Non Return Valve (NRV)
1. The NRV is placed behind the water outlet.
2. First install the NRV, then the spring.
Note: Make sure that the spring is placed correctly
before you install it in the water outlet.
.
Repair instructions
To Next Page
Loading...
Need help?
General
