Hypertherm ArcGlide THC Field Service Bulletin

ArcGlide THC Replacement Parts Field Service Bulletin 806560 5
Section 1
Parts
Introduction
This Field Service Bulletin provides information on replacement parts for the ArcGlide THC and how to replace them.
Tools
The following tools and materials are used in the replacement procedures in this FSB:
WARNING!
ELECTRIC SHOCK CAN KILL
Disconnect electrical power before performing any maintenance.
See the Safety section of the ArcGlide THC Instruction Manual for more
safety precautions.
 9/16-inch wrench  3/16-inch blade screwdriver
 1/4-inch socket wrench and extension  Number 1 and 2 Phillips screwdrivers
 14 mm, 21 mm wrenches  Needle-nose pliers
 Hex wrenches (inches): 3/32, 7/64, 9/64, 5/32, 3/16, 0.05
 Thread sealant ( Locktite® 242 or equivalent )
 Hex wrenches (metric): 3 mm, 4 mm  Level
 Adjustable wrench

Hypertherm ArcGlide THC Specifications

General

Brand	Hypertherm
Model	ArcGlide THC
Category	Control Systems
Language	English