MAX200 Instruction Manual 5-11
MAINTENANCE
Figure 5-3 Extension Connectors
015036
UN: Right Hand
‘A’ Male Brass
015049
UN: Left Hand
‘A’ Male Brass
015208
Adapter: #5 Male X
#5 Male Brass
13. After installing the torch to the torch leads, check the coolant level in the tank prior to startup. More coolant
may be required if lead lengths were increased. See page 3-5 to add torch coolant.
14. If you have increased torch lead length from 50 feet or under to 75 feet or over, see Adjusting Plasma Gas on
page 5-12.
To Next Page
Loading...
Need help?
General
