Hypertherm MAX200 User Manual

2-6 MAX200 Instruction Manual
SPECIFICATIONS
PAC200E (65°) Gouging Trigger Torch – #073188*
13.73 (349 mm)
Metal Gouging Technique** Metal Removal Rate***
Mild Steel Straight Gouge 46 lbs/hr (21 kg/hr)
Side Gouge 43 lbs/hr (19 kg/hr)
Side Weaving Gouge 65 lbs/hr (29 kg/hr)
Straight Weaving Gouge 66 lbs/hr (30 kg/hr)
Stainless Steel Straight Gouge 83 lbs/hr (37 kg/hr)
Side Gouge 77 lbs/hr (35 kg/hr)
Side Weaving Gouge 89 lbs/hr (40 kg/hr)
Straight Weaving Gouge 86 lbs/hr (39 kg/hr)
Aluminum Straight Gouge 36 lbs/hr (16 kg/hr)
Side Gouge 43 lbs/hr (19 kg/hr)
Side Weaving Gouge 52 lbs/hr (23 kg/hr)
Straight Weaving Gouge 41 lbs/hr (18 kg/hr)
* Note: This number is for torch only (without leads). See Parts List section for torch assembly with
leads.
** See Gouging in Section 4 for examples of gouging techniques.
*** When Argon-Hydrogen is used as the plasma gas.
Specifications and Metal Removal Rate:
Plasma Gas Types ...............................................Air, H35
Shield Gas Types .................................................Air, N
2
Coolant Flow Rate................................................0.8 gpm (3 lpm)
Weight (without leads)..........................................2.5 pounds (1.1 kg)
1.14 (29 mm)
1.45 (37 mm)
1.74
(44 mm)
1.52 (37 mm)
1.68 (43 mm)
12.56 (319 mm)
5.79
(147 mm)
3.56
(90 mm)
2.50
(64 mm)
1.61
(41 mm)

Hypertherm MAX200 Specifications

General

Brand	Hypertherm
Model	MAX200
Category	Welding System
Language	English