5-2 MAX200 Instruction Manual
7-96
MAINTENANCE
WARNING
SHOCK HAZARD: The large electrolytic capacitor(s) (blue-cased cylinder(s)) store large amounts of
energy in the form of electric voltage. Even if the power is off, dangerous voltages exist at the capacitor
terminals, on the chopper, and the diode heatsinks. Never discharge the capacitor(s) with a screwdriver
or other implement…explosion, property damage and/or personal injury will result. Wait at least five
minutes after turning the power supply off before touching the chopper or the capacitor(s).
Routine Maintenance
The MAX200 system is designed to require very little regular maintenance under normal use. Refer to MAX200
Service Manual, IM-162 ( #801620) for torch, torch leads, torch coolant and power supply routine maintenance
checks to keep your system in top running condition.
To Next Page
Loading...
Need help?
General
