Hypertherm Powermax 85 Operator's Manual

SPECIFICATIONS
powermax 65/85 Operator Manual 1-7
2
Equipment complies with IEC 61000-3-12 provided that the short-circuit power S
sc
is greater
than or equal to 2035 KVA at the interface point between the user’s supply and the public
system. It is the responsibility of the installer or user of the equipment to ensure, by consultation
with the distribution network operator if necessary, that the equipment is connected only to a
supply with a short-circuit power S
sc
greater than or equal to 2035 KVA.
1
Defined as a plot of output voltage versus output current.
3
Equipment complies with IEC 61000-3-11 provided that the supply impedance, Zmax, is 0.201
or less. It is the responsibility of the installer or user of the equipment to ensure, by consultation
with the distribution network operator if necessary, that the equipment is connected only to a
supply with a impedance of 0.201 or less.
4
WARNING: This Class A equipment is not intended for use in residential locations where the
electrical power is provided by the public low-voltage supply system. There may be potential
difficulties in ensuring electromagnetic compatibility in those locations, due to conducted as well
as radiated disturbances.

Hypertherm Powermax 85 Specifications

General

Brand	Hypertherm
Model	Powermax 85
Category	Welding System
Language	English