Hypertherm Powermax 85 Operator's Manual

TORCH SETUP
powermax 65/85 Operator Manual 3-5
Choose the hand torch consumables
Powermax systems with the Duramax series H65, H85, H65s, or H85s torch are shipped with a full
set of cutting consumables pre-installed. Hypertherm also includes spare cutting electrodes and
nozzles, and gouging consumables in the consumables box.
Both styles of hand torches shown above use the same consumables.
Hand torches use shielded consumables. Therefore, you can drag the torch tip along the metal.
Consumables for hand cutting are shown on the next page. Notice that the retaining cap and
electrode are the same for cutting, gouging, and FineCut
®
applications. Only the shield, nozzle,
and swirl ring are different.
For the best cut quality on thin materials, you may prefer to use FineCut consumables, or use a
45A nozzle and reduce the amperage to that setting.

Hypertherm Powermax 85 Specifications

General

Brand	Hypertherm
Model	Powermax 85
Category	Welding System
Language	English