108 Powermax125 Operator Manual 808080 Revision 0
8 – Maintenance and Repair
Routine maintenance tasks
Every use:
Inspect the consumables for proper
installation and wear.
Check indicator lights and fault icons.
Correct any fault conditions.
Every 3 months:
Replace any damaged labels.
Inspect the trigger for damage.
Inspect the torch body for cracks
and exposed wires. Replace any
damaged parts.
Inspect the power cord and plug. Replace if
damaged.
Inspect the torch lead. Replace if
damaged.
Inspect the screws on the machine torch that connect the torch
body to the mounting sleeve. Tighten the screws, if needed.
Every 6 months:
or
Clean the inside of the power
supply with moisture-free
compressed air or a vacuum.
To Next Page
Need help?
General
