Hypertherm Powermax125 User Manual

74 Powermax125 Operator Manual 808080 Revision 0
6 – Machine Torch Setup
Connecting the torch lead
This system is equipped with FastConnect, a quick-disconnect system for connecting and disconnecting handheld and
machine torch leads. When connecting or disconnecting a torch, first turn OFF the system. To connect the torch, push
the connector into the receptacle on the front of the power supply.
To remove the torch, press the red button on the connector and pull the connector out of the receptacle.
Red button

Hypertherm Powermax125 Specifications

General

Brand	Hypertherm
Model	Powermax125
Category	Welding System
Language	English