Hypertherm Powermax125 User Manual

Powermax125 Operator Manual 808080 Revision 0 59
5 – Hand Cutting
2. Fire the torch while still at an angle to the workpiece. Slowly rotate the torch to a perpendicular (90°) position.
3. Hold the torch in place while continuing to press the trigger. When sparks exit below the workpiece, the arc has
pierced the material.
4. When the pierce is complete, drag the nozzle lightly along the workpiece to proceed with the cut.

Hypertherm Powermax125 Specifications

General

Brand	Hypertherm
Model	Powermax125
Category	Welding System
Language	English