H18
CHARGING CONNECTOR LOCK
Locking Charging Cable
You may select when the charging
connector can be locked and
unlocked in the charging inlet.
The driver can select the charge con-
nector lock mode from the User
Settings in the LCD display by select-
ing 'User Settings ➝ Convenience ➝
Locking Charging Cable'.
When the Charging Connector
is Locked
• Always mode :
The connector locks when the
charging connector is plugged into
the charging inlet. The connector is
locked until all doors are unlocked
by the driver. This mode can be
used to prevent charging cable
theft.
- If the charging connector is
unlocked when all doors are
unlocked, but the charging cable
is not disconnected within 15 sec-
onds, the connector will be auto-
matically locked again.
- If the charging connector is
unlocked when all doors are
unlocked, but all doors are locked
again, immediately, the connector
will be automatically locked
again.
• While charging mode :
The connector locks when charg-
ing starts. The connector unlocks
when charging is complete. This
mode can be used when charging
in a public charging station.
• Do not lock mode (if equipped) :
The connector unlocks regardless
of the state of charging.
Press the charging connector
release button, disconnect the con-
nector.
Be careful to theft of the charging
cable.
While
charging
Always
Do not lock
(if equipped)
Before
charging
X O X
While
charging
O O X
Finished
charging
X O X
OAEEQ019085R
To Next Page
Loading...
Need help?
General
