5-22
Driving your vehicle
To resume Smart
Recuperation System
To re-activate the Smart Recuperation
System while driving, pull and hold the
right side paddle shifter for more than
1 second again. Then, AUTO for the
regenerative braking level will appear
on the cluster.
To turn Smart Recuperation
System off
To turn off the system, shift to P
(Park) and deselect 'User settings →
Convenience → Smart recuperation'
on the User Settings mode.
Vehicle-to-Vehicle Distance
recognition sensor
(Front radar)
In order for the Smart Recuperation
System to operate properly, always
make sure the radar sensor cover is
clean and free of dirt, snow, and
debris. Dirt, snow, or foreign sub-
stances on the lens may adversely
affect the sensing performance of
the sensor. In this case, the system
operation may stop temporarily and
not operate normally.
• Do not apply license plate
frame or foreign objects such
as a bumper sticker or a
bumper guard near the radar
sensor. Doing so may adverse-
ly affect the sensing perform-
ance of the radar.
• Always keep the radar sensor
and lens cover clean and free
of dirt and debris.
(Continued)
CAUTION
When the Smart Recuperation
System is cancelled automati-
cally, adjust the vehicle speed
directly by depressing the
accelerator or brake pedal
according to the road condition
ahead and driving condition.
WARNING
To Next Page
Loading...
Need help?
General
