Qscan User’s Guide Version 1.4
Page 31
Aamva Control
X032 a b
a Aamva required 0=no 1=yes
b Field Masking 0=off 1=on
Aamva is the standard for drivers licenses in the US and Canada. Turn
the Aamva Required option on (a=1) to restrict the reading of pdf417
barcodes to Aamva only. If on, no pdf417 barcodes will be read unless
they meet the Aamva format. This setting has no effect on other barcode
symbologies.
When Aamva eld masking is on (b=1) , each eld from the Aamva
drivers license is parsed. You can then use the Aamva eld commands to
concatenate elds together.
PROGRAMMING
AAMVA
Aamva Field Commands
X033 ff ll ttt ff ll ttt
X034 ff ll ttt ff ll ttt
X035 ff ll ttt ff ll ttt
X036 ff ll ttt ff ll ttt
X037 ff ll ttt ff ll ttt
Extractions 1-2
Extractions 3-4
Extractions 5-6
Extractions 7-8
Extractions 9-10
ff Field to extract see table next page 000=none
ll Field length 1-20 0=actual
ttt terminator character 000=none
These commands select the elds which will be extracted and processed.
Fields are extracted in the order of extraction # ( 1 rst, 10 last). If
the eld length is set to non 0, then if the eld is larger than the value
specied, it is truncated. If smaller, it is left justied and blank lled.
The terminator character (if non 0) is appended to the eld value. ttt is
entered as a 3-digit decimal ascii value (065=”A”, 053=”5”).
AAMVA
To Next Page
Loading...
Need help?
General