IBM 5100 Maintenance Analysis Procedures

(
(
(
(-
AUXILIARY TAPE MAP
PAGE 1 OF 1
ENTRY POINTS
FROM I ENTER THIS MAP
-------+----------------------
MAP I ENTRY PAGE STEP
NUMBER I POINT NUMBER NUMBER
-------+----------------------
0200 I A 1 001
0860 I A 1 001
001
(Entry Point A)
This is the entry MAP for the auxiliary tape drive.
If the PROCESS CHECK light is on, the auxiliary
tape drive MDI cannot be loaded.
Is the PROCESS CHECK light on?
Y N
002
Use the keys on the numeric section of the
keyboard:
-Hold CMD and press HOLD
-Hold CMD and press - (minus)
-For
BASIC, hold CMD and press * (multiply)
-For APL , hold
CMD and press x (multiply)
-Press C
-Hold CMD and press 1
-Press EXECUTE
Follow the instructions on the display until
DCP2 MENU appears. Then:
-Enter 840
-Press EXECUTE
The auxiliary tape drive MDI should
now load
and run. Follow the instructions on the
display.
When completed, return to the
BASIC/ APL mode by pressing RESTART.
003
Go to MAP 0420, Entry Point A.
COPYRIGHT IBM CORP 1975
MAP 0850-1
EXIT POINTS
-------~----------------------
EXIT THIS MAP I TO
---------------+--------------
PA~E
NUMBER
STEP I MAP
NUMBER I NUMBER
ENTRY
POINT
--------------.+-----------~-~
1
003 I 0420 A
07JUL75 PN 1608395
EC 828851 PEe -------
MAP 0850-1

IBM 5100 Specifications

General

Brand	IBM
Model	5100
Category	Laptop
Language	English