Chapter 2. Installation
Installation, Attachment, And Configuration Overview
Note!
Before using this information and the product it supports, read the
information and Communication Statements in “Notices” on page 293.
DANGER
<4> Do not connect or disconnect any communication port, teleport, attachment
connector, or power cord during an electrical storm.
<5> Power off the printer and disconnect the power cord before connecting or
disconnecting communication port, teleport, or attachment cable connector.
The following is an overview of the steps you need to complete to successfully
install, attach, and configure your printer:
1. Unpack the printer from the shipping package. Follow the instructions
provided on the shipping package.
2. Set up the printer, which includes; removing shipping materials, installing the
ink transport assembly, ink transport media, ink cartridge, and loading paper.
Follow the instructions in IBM Infoprint 6500 Line Matrix Printers: Quick Start
Guide.
3. Perform an initial print test by printing the current configuration page as
described on page 24.
4. Review the information contained in the README.1ST file on the
Configuration Utility section on the User’s CD.
Note: The Configuration Utility section contains a README.1ST file that
describes the contents of the CD, AIX
®
print drivers, and configuration
information for replacing existing IBM printers. In addition, there might
be another file, called README.TXT that contains information that was
added after the printer documentation was printed.
© Copyright IBM Corp. 2005 11
To Next Page
Loading...
Need help?
General