Tape cartridges (FC 6134)
Learn about the types of tape cartridges that are available for this drive.
Available tape cartridges
Table 36. 8-mm data cartridges
Part Number Type of Cartridge Length
35L1044 20 GB AME with SmartClean Data Cartridge 75 m (246 ft)
09L5323 40 GB AME with SmartClean Data Cartridge 150 m (492 ft)
18P6484 60 GB AME with SmartClean Data Cartridge 225 m (738 ft)
35L1409 Cleaning Cartridge
Resetting the tape drive
You might need to reset your tape drive. Use the procedure in this topic to perform this task.
Use this information to reset your tape drive, without affecting server operation. Allow up to 2 minutes
for the entire tape drive process to complete.
Attention: Resetting a tape drive before the current backup operation has completed can cause loss of
customer data.
To reset the tape drive, complete the following steps:
1. Press and hold the eject button for 20 seconds, and then release the button. The LEDs on the drive
flash while the reset function is in process.
2. After the LEDs stop flashing, wait approximately one minute for the drive to complete the reset
operation. The drive is then ready to use.
46 Managing devices
To Next Page
Loading...
Need help?
General