Cable management arm
The cable management arm (CMA), which consists of an upper and lower
assembly, are packaged separately from the expansion enclosure. As Figure 26
shows, each CMA assembly is attached to the rear end of the support rails.
Unpacking and installing the enclosure: 2077-92F
Before you unpack and install the 2077-92F expansion enclosure, ensure that you
review and follow the installation checklist and safety notices.
Figure 25. 2077-92F support rails
Figure 26. 2077-92F CMA assemblies
44 Storwize V5000 Gen2: Quick Installation Guide
To Next Page
Loading...
Need help?
General