Installing Software for Windows 3.11
Chapter 7. Installing Software 7-11
5 Using the Up Arrow, highlight MS-DOS System and press
Enter.
6 Select MS-DOS System with APM from the list and press
Enter.
Verify that Computer has changed to MS-DOS System with
APM. If the item has not changed, return to step 5.
Installing the Display Driver for Windows 3.11
Note:
The display driver should be installed
right after you install Windows 3.11.
You must install the display driver to use the various screen
resolutions and colors for the LCD and external monitor. (See page
3-16 for possible combinations of resolution and color.) The display
driver also takes advantage of the computer’s video capability.
Installing the Display Driver
1 Insert the Display Driver Diskette for Windows 3.11 into the
diskette drive.
2 Go to the DOS command prompt A:\ and type SETUP to start
the display driver setup program.
3 Select your language; for example, enter A for English setup.
4 Press any key; then press Enter to select Windows Version 3.1
(6555X accelerated drivers).
5 Press Enter to select All Resolutions; then press End.
6 Enter your WINDOWS subdirectory and press Enter to begin
installation.
7 Press any key and type Y to exit the setup program.
Selecting the Resolution
1 Start DOS and go to the WINDOWS subdirectory.
2 Type SETUP to start Windows setup program.
To Next Page
Loading...
Need help?
General