Using the Computer LCD or the External Monitor
3-14 IBM ThinkPad 310E/310ED: User’s Guide
You can select where to display the computer output by using the
following commands:
• Using the Fn key function: Press and hold the Fn key; then
press F3 key. The setting toggles sequentially between LCD,
CRT and Both.
• Using the Notebook Manager function: Click on the Display tab;
then select LCD Panel Only, External monitor or Both as the
switching display device.
Points to Consider When Using the DOS Screen on the LCD
When you use a DOS application that supports only VGA mode
(640-by-480 resolution) with your computer, the screen image might
look slightly distorted or might appear smaller than the display size.
This is to maintain compatibility with DOS applications.
Attaching a Monitor
Note:
When installing an operating system,
you must install the display driver
before you can use an external
monitor.
Your computer supports the following color depth and resolution on
an attached monitor:
Color Resolution
640 by 480
256 colors 800 by 600
1024 by 768
65,536 640 by 480
800 by 600
16,777,216 colors 640 by 480
To Next Page
Loading...
Need help?
General