Icom IC-7300 HF Plus User Manual

17-2
17
OPTIONS
Options
IC-PW1/IC-PW1EURO linear amplifier
HF/50 MHz all band 1 kW linear amplier including an
automatic antenna tuner. An optional OPC-599 is required
for the connection.
SM-50
desktop microphone
Dynamic microphone with
[UP]/[DOWN] switches.
HM-36 microphone
Hand microphone with
[UP]/[DOWN] switches.
SM-30
desktop microphone
Desktop microphone
with a low frequency cut
function.
PS-126 dc power supply
• Output voltage: 13.8 V DC
• Maximum output current:
25 A
SP-23
external speaker
External speaker with high
and low frequency cut
functions.
CT-17 ci-v converter
For remote transceiver
control using a PC
equipped with an
RS-232C port.
SP-34
external speaker
External speaker with high
and low frequency cut
functions.
AH-2b
antenna element
A 2.5 m (8.2 ft)
long antenna
element for mobile
operation with the
AH-4.
AH-4 antenna tuner
Automatic antenna
tuner to tune a long
wire antenna for base,
portable, or mobile
HF/50 MHz operation.
AH-740 automatic
tuning antenna
High performance,
automatic high-speed
tuning antenna.
The optional AH-5NV
nvis kit is available.
• AH-5NV nvis kit
Use with the AH-740.
• AH-710 folded dipole antenna
Covers 2 to 30 MHz wide frequency range.
Element length: 24.5 m (80.4 ft)
Coaxial cable (supplied): 30 m (98.4 ft)
• HM-219 microphone
The same as supplied.
• MB-118 mounting bracket
To mount the transceiver inside a vehicle.
• MB-123 carrying handle
• OPC-420 control cable
A 10 m (32.8 ft) shielded control cable for the AH-4.
• OPC-599 adapter cable
13-pin ACC connector adaptor to 7-pin + 8-pin ACC
connectors.
• RS-BA1 ip remote control software
NOTE: To remotely control transceivers using the
RS-BA1, BE SURE to comply with your local regulations.
• SP-33 external speaker
Designed for base station operation.
• SP-35 external speaker
Designed for mobile operation.
• SP-38 external speaker
Designed to match the IC-7300.
Previous view

Icom IC-7300 HF Plus Specifications

General

Type	HF/50 MHz Transceiver
Modes	SSB, CW, RTTY, AM, FM
Receiver Type	Direct Sampling
Antenna Connector	SO-239
Antenna Impedance	50 ohms
Power Supply	13.8V DC ±15%
Frequency Coverage	0.030-74.800 MHz
RF Output Power	100 W
Receiver Sensitivity	0.15 μV (typical)
Receiver Selectivity	SSB: 2.4 kHz, CW: 500 Hz
Image Rejection Ratio	70 dB
IF Rejection Ratio	70 dB (HF bands), 60 dB (50 MHz band)
Audio Output Power	2.5 W (at 10% distortion)
Display	4.3-inch color TFT touch screen
Dimensions	240 x 94 x 238 mm
Number of Channels	101 (99 regular, 2 scan edge)
Current Consumption	21A (maximum transmission)