18
8
OTHER FUNCTIONS
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Using the LAND channel group
A maximum of 100 programmable channels (allocated
136.000 to 174.000 MHz) are preset into the LAND channel
group for simple communication with LMR/PMR transceivers
in the VHF band.
The default setting of the LAND channel group is the same
as that of the INT channel group. Ask your local Icom
dealer for the LAND channel group setting and LMR/PMR
frequency setting details.
D Selecting the LAND channel group
z Hold down [U/I/C/L]*
1
or [CH]*
2
for 1 second to change the
channel group.
• “ LAND” is displayed when the LAND channel group is
selected.
*
1
For the USA, Chinese, and Export versions.
*
2
For the European, UK, German, and Australian versions.
■ Using the Voice Scrambler
The Voice Scrambler provides private communications. In
order to receive or send scrambled transmissions, you must
activate the scrambler function. You also need to set the
scrambler code in the Set mode (p. 21).
L The Voice Scrambler is not usable on Channel 16.
z While holding down [SQL], push [SCAN/DUAL] to turn ON
or OFF the function.
• “SCRM” is displayed.
■ Checking the battery health
and battery cycle
When you using the transceiver with the supplied battery
pack, you can check the battery health and battery cycle.
z Hold down [H/L] for 1 second to the battery cycle.
• Displayed for 5 seconds.
L The battery health is indicated by the status indicator.
Light color Battery health
Blue 80 ~ 100%
Purple 60 ~ 80%
Red 40 ~ 60%
Blinks red 0 ~ 40%
To Next Page
Loading...
Need help?
General
Weight and Dimensions
