Icom IC-M92D - Test Acknowledgement Calls; Transmitting Test Acknowledgement DSC Calls

47
8
DSC OPERATION
Transmitting a Test Acknowledgement call D
When the “TEST ACK” in DSC settings is set to ‘Auto TX’
(p. 61), the transceiver automatically transmits a reply call
when receiving a Test call.
Quick ACK:
When q a Test call is received, beeps sound and the screen
as shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK]. w
 •Push[INFO]todisplaytheTestcallinformation.
Push [BACK] to return to the previous screen, or push [ACK].
The Test ACK confirmation screen is displayed. e
Push [CALL] to transmit the acknowledgement call.
While transmitting the acknowledgement call, the screen r
as shown below is displayed, and then returns to the nor-
mal operating mode.