Icom IC-R20 User Manual

8
2
BATTERY INSTALLATION/CHARGING
1
2
■ Battery installation
Make sure receiver power is turned OFF before installing or
replacing the batteries.
qRemove the battery cover from the receiver.
wFor alkaline battery use, attach the supplied battery spacer.
eInstall 3 R6 (AA) size alkaline batteries.
• Be sure to observe the correct polarity.
Keep the battery contacts clean to avoid rust or poor contact.
It’s a good idea to clean the battery terminals once a week.
DD
Battery pack installation
q Remove the battery cover from the receiver.
w Remove the supplied battery spacer for R6 (AA) size bat-
tery use.
e Install the Li-Ion battery pack (BP-206).
• Be sure to observe the correct direction.
• Charge the Li-Ion battery pack before use.
•Battery pack installation
•Battery pack removal
q
w
e

Icom IC-R20 Specifications

General

Brand	Icom
Model	IC-R20
Category	Receiver
Language	English