61
11
OTHER FUNCTIONS
DD
Weather channel selection
qPush [MR S.MW] several times to select the weather chan-
nel group.
wRotate [R-DIAL] to select the desired weather channel.
ePush [VFO MHz] to return to VFO mode, or push [MR
S.MW] to select other mode to exit the weather channel.
DD
Weather alert function
NOAA broadcast stations transmit weather alert tones before
important weather announcements. When the weather alert
function is turned ON, the selected weather channel is moni-
tored each 5 sec. for the announcement. When the alert signal
is detected, the “ALT” and the “WX” indications are displayed
alternately and sounds a beep tone until the receiver is oper-
ated. The previously selected (used) weather channel is
checked periodically during standby or while scanning.
qSelect the desired weather channel.
wTurn the weather alert function ON in set mode.
➥ Push [8 SET] for 1 sec. to enter set mode.
➥ Rotate [R-DIAL] to select “WX ALERT,” then push [8
SET]. Rotate [R-DIAL] to select “ON.”
➥ Push [DUALWATCH] to exit set mode.
eSet the desired stand-by condition.
• Select VFO or memory channel.
• Scan or priority watch operation can also be selected.
rWhen the alert is detected, a beep sounds and the follow-
ing indication will be displayed.
t Turn the weather alert function OFF in set mode.
To Next Page
Need help?
General
