15
3
FREQUENCY AND CHANNEL SETTING
DD
Using the keypad
The frequency can be directly set via numeral
keys.
• When editing a frequency outside of the fre-
quency range, the previously displayed frequency
is automatically recalled after editing last digit.
qPush [VFO MHz] to select VFO mode, if
necessary.
w Enter the desired frequency via the keypad.
• Direct input can be set until 1 kHz digit, rotate
[R-DIAL] to set below 1 kHz frequency after
set tuning steps, if necessary. (See the previ-
ous page for setting the tuning step.)
Pushing [VFO MHz] omits the entry of 100 kHz and below, when you want to
edit to these digits “0.” Push [DUALWATCH] to cancel the entry.
To Next Page
Loading...
Need help?
General
