6
OTHER FUNCTIONS
6-12
Resetting
Reset or All Reset function.
BE CAREFUL! An All Reset clears all programming and returns all settings to the factory defaults.
D Partial Reset
1. Rotate [VOL] counter-clockwise to turn OFF the
transceiver.
2.
clockwise to turn ON the transceiver.
•
operating frequency is displayed.
TIP: A Partial Reset resets the operating settings to
their defaults without clearing the following:
• Memory Channel contents
• Scan Edge contents
• Call Channel contents
• DTMF memory contents
• Home Channel settings
D All Reset
1. Rotate [VOL] counter-clockwise to turn OFF the
transceiver.
2.
rotate [VOL] clockwise to turn ON the transceiver.
•
then the operating frequency is displayed.
To Next Page
Loading...
Need help?
General
