2
7
BASIC MANUAL
■ Inserting a microSD card
See page 25 for the usable microSD card.
Turn OFF the transceiver.
2.
3. With the terminals facing the front, insert the card into the slot until it locks in place
and makes a ‘click’ sound.
L When removing, push in the microSD card until a ‘click’ sounds. The card is unlocked,
and you can pull it out.
NOTE:
• DO NOT touch the terminals.
• DO NOT remove the card from the transceiver while the card is being accessed.
Otherwise, the card data may be corrupted or deleted.
4. Completely close the [microSD] slot cover.
[microSD] slot
microSD card
Terminals
facing the front
Slot cover
CAUTION: DO NOT forcibly or
inversely insert the card. It will
damage the card or the slot.
■ Turning ON the transceiver
z Hold down [
• A beep sounds.
• After the opening message and remaining battery
capacity are displayed, the operating frequency or
repeater name is displayed.
z Hold down [
transceiver.
■ Adjusting the audio level
Rotate [VOL] to adjust the audio level.
L The display shows the audio level while adjusting.
[VOL]
[
]
To Next Page
Loading...
Need help?
General
