D-STAR OPERATION
61
D-STAR GUIDE
■ “FROM” (Access repeater) setting
By rotating [DIAL]:
Select a preset repeater by rotating [DIAL] on the DR screen.
From the repeater list:
When your access repeater is in your transceiver’s repeater list,
you can select it by selecting the repeater area and name, if
entered, or call sign.
When you know your access repeater:
When you do not know which repeater you can access:
Search for a repeater using the DR scan:
The Normal DR scan searches for output repeater frequencies or
simplex signals.
You can also nd FM repeaters.
Search for the nearest repeater:
The transceiver searches for the nearest repeater by using your
location and the repeater’s location, if it is entered in the Repeater
List.
The nearest repeaters in your transceiver’s Repeater List are
displayed as selectable choices.
You can select a nearby DV or FM repeater type.
When the “FROM” data is saved in the TX History:
Select from the TX History:
Select a repeater that you have accessed before, from the TX
History record.
To Next Page
Loading...
Need help?
General
