D-STAR OPERATION
51
D-STAR GUIDE
■ Receiving
When a DV call is received, the call signs of the caller, the called station, and the called
station’s access repeater are saved in the RX History. Up to 50 calls can be saved.
Even if you turn OFF the transceiver, the RX History is retained.
This section describes how to display the RX History screen and how to save the call sign
to your memory.
When receiving a call from “JM1ZLK”:
Displayed when position data is received.
Caller station*
RX message
Received date and time
Called station
The S-meter and the caller’s call sign are displayed.
RX HISTORY screen (LAST(MAIN))
Step 1: Display a received call sign.
1. Hold down [CD] for 1 second.
• Displays the RX HISTORY screen.
2. Push D-pad().
• Displays other RX history records.
Received repeater name, or frequency
* The caller name is displayed when the name is set in the “Your Call Sign” list.
Push [QUICK] to switch between name display and call sign display.
“/” and a note may be displayed after the call sign.
If a call is received from an area, not from a specic station, “CQCQCQ” is displayed.
Record number
Displayed when received through a Gateway.
To Next Page
Loading...
Need help?
General
